Opera on Systems
Summit™ Series | SX
‐
SmartTouch™ Control
63
Check
the
sani zer
May appear on a regular schedule, i.e. every 7 days.
Check sani zer level and other water chemistry with a test kit and adjust with the appropriate chemicals.
Clean
the
fi
lter
May appear on a regular schedule, i.e. every 30 days.
Clean the
fi
lter media as instructed by the manufacturer. .
Test
the
GFCI
(or
RCD)
May appear on a regular schedule, i.e. every 30 days. The GFCI or RCD is an important safety device and must be tested on a
regular basis to verify its reliability. Every user and owner is to be trained to safely test the GFCI or RCD associated with the hot tub
installa on. A GFCI or RCD will have a TEST and RESET bu on on it that allows a user to verify proper func on.
Change
the
water
May appear on a regular schedule, i.e. every 90 days. Change the water in the spa on regular basis to maintain proper chemical
balance and sanitary condi ons.
Clean
the
cover
May appear on a regular schedule, i.e. every 180 days.
Vinyl covers should be cleaned and condi oned for maximum life
Change
the
fi
lter
May appear on a regular schedule, i.e. every 365 days.
Filters should be replaced occasionally to maintain proper spa func on and sanitary condi ons.
Change
the
UV
May appear on a regular schedule.
Change the UV as instructed by the manufacturer.
Check
ozone
May appear on a regular schedule.
Check the ozone generator as instructed by the manufacturer.
Service
check
‐
up
May appear on a regular schedule.
Do a service check
‐
up as instructed by the manufacturer.
