PDS spas Summit Series, Owner'S Manual

Page: 74 / 88

Opera on Systems Summit™ Series | SX ‐ SmartTouch™ Control 71
Workout Se ngs
Ramping
Ramping (A) controls the transi on between water speeds. The ramping speed range is 105 seconds (B). Ramping only applies in
those Workout Programs where the speed changes by more than one step at some point (for example: Speed 1 to Speed 4)
Blink Lights
When Blink Lights € is enabled, the spa lights will blink a moment before the swim pump changes speed. Blink Lights works with all
workouts listed in Workout Programs. The dura on must be set to 3 minutes or longer for Blink Lights to work.
Press the
Blink Lights line (F) to turn Blink Lights On (Yes) or O ff (No).
Ramping
Ramping
3 Sec.
B
Blink Lights
Blink Lights Yes
F
Start Delay
Start Delay (C) enables you to delay the pumps at the beginning of a workout. The delay range is 1 ‐ 15 seconds (D).
Start Delay works with all workouts.
Workout Settings
A
Blink Lights
Start Delay
Ramping
Workout Settings
C
Blink Lights
Start Delay
Ramping
Start Delay
Start Delay
4 Sec.
D
Workout Settings
E
Blink Lights
Start Delay Ramping