PDi WaveStar 2000A Installation And Operation Manual Download Page 26 | Manualshive

Page: 26 / 107

background image

WaveStar Static Transfer Switch 2000A 3-Pole

26

Ctrl Nr: PM375118-004

3

System Unpack and Inspection

3.1

External Inspections

1. While the STS is still on the truck, inspect the equipment and shipping skids for any signs of

damage or mishandling. If the system shows any damage, note it on the freight bill and file a
damage claim with the carrier within 24 hours. Please contact PDI at 1-800-225-4838 (select
option 3) if damage has occurred. Do not attempt to install the system if damage is apparent.

2.  Locate the bag containing the keys for the front doors, which will be attached to the cabinet.
3.  Verify that all units have been received.
4.  Compare the contents of the shipment with the bill of lading. Report any missing items to the

carrier and PDI immediately.

5. If you ordered spare parts, verify that they arrived.
6. If the unit is to be stored before installation, it should be stored in a dry environment within

storage temperatures specified in

2.4 Environmental Specifications

. Use the original

packing materials or other suitable means to keep the unit clean.

3.2

Unloading, Unpacking, and Handling

You should unpack your PDI product with the same care used in packing the product for safe and efficient
delivery to your facility.

1. Use the shipping skid provided to move the system as close as possible to the final

installation position. A forklift or pallet jack can be used to move the skid. Do not exceed a 10-
degree tilt if moving with a forklift. Tipping the unit can cause it to fall which can cause
damage or injury to personnel.

2. Exercise care when handling STS system cabinets to avoid equipment damage or injury to

personnel.

3. Before moving the unit, check the unit size and weight in

2.1 System Enclosure.

4. Plan your route for moving the equipment. Ensure that all passages are large enough to

accommodate the unit and support the weight. Check for any non-negotiable corners or
offsets in hallways.

5. To remove the unit from the skids, carefully cut the bands holding the unit or unit modules to

the pallets. Use cautions as bands are under tension and can cause personal injury. When
opening the shipping package, use care not to puncture the packaging with sharp objects.
Remove all plastic wrapping and packing material from the unit.

Important!

Read this entire Installation and Operation manual before installing and
operating the unit.

Upon receipt of the STS, the Installer should perform the following steps to
assure a high quality installation.

«
...
24
25
26
27
28
...
»

Summary of Contents for WaveStar 2000A












































































































Reviews:

No comments

Related manuals for WaveStar 2000A

Brand: Geist Pages: 74

Brand: AudioQuest Pages: 2

Expert Power Control 8291

Brand: GÜDE Pages: 91

Expert Power Control 8031 Series

Brand: GÜDE Pages: 98

Expert Power Control 8041 Series

Brand: GÜDE Pages: 118

Brand: Baumuller Pages: 62

Brand: LDR Pages: 32

Brand: MAC TOOLS Pages: 28

Brand: YOKOGAWA Pages: 156

Brand: Base Pages: 2

Brand: ABB Pages: 16

Brand: Adam Hall Pages: 2

Brand: Security Tronix Pages: 4

Brand: EuroLite Pages: 16

Brand: ELINEX Pages: 2

Brand: Belkin Pages: 20

P74977UKAP20500UK3M

Brand: Belkin Pages: 20

Brand: Belkin Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands