PDi PDI-P26LCDC Installation And Operating Instructions Manual Download

Page: 47 / 52

PDI-P26, 32, 40 TV Installation Guide

Page 47 of 52

Communication Systems Inc.

Better Solutions Are Within Reach™

INSTALLATION and OPERATING INSTRUCTIONS

PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 PH +1-937-743-5664

Document Number: PD196I127R1.DOC

DVD Content Information

While the DVD is playing, you can view different types of information about the content, such as what chapter is being

played or what subtitle is set. The table below shows different categories of information and what can be changed.

Press GOTO, at the bottom of the Patient remote.

Press

▲

▼

to highlight the desired category

Press OK to select the category.

If there is a number to be entered, use the number buttons.

NOTE:

Once a digit is entered, the next digit will be ready to be entered. The directional buttons WILL NOT

work

If it is a list of choices, do the following.

Press

▲

▼

to highlight the desired choice.

Press OK to select the item.

Press GOTO to return to normal viewing.

Category

Options

Title

Displays the current title. This can be changed if the DVD

has multiple titles and it allows you to change them.

Chapter

Displays the current chapter. This can be changed if the

DVD has multiple chapters and it allows you to change

them.

Audio

Displays the current audio setting. This can be changed to

another available language or audio output.

Subtitle

Displays the current subtitle setting. This can be changed

to another available subtitle.

Angle

Some DVDs have scenes where multiple angles have been

recorded. You can change the angle of a scene.

TT Time

This shows the length of the playing title. You can enter a

time, and the disc will go to that time.

CH Time

This shows the length of the playing chapter. You can enter

a time, and the disc will go to that chapter and time.

Repeat

Chapter, Title, All, Off

Time Display

Title Elapsed, Title Remain, Chapter Elapsed, Chapter

Remain

CD Playback

Inserting disc

Make sure TV is powered.

If the SLOT 1 or 2 DVD source is not already displayed, press

TV/AV

on the TV or remote until it is displayed.

Gently insert the disc into the slot, with the label side facing the same direction as the front of the TV.

Label side

Summary of Contents for PDI-P26LCDC





















































Search results

Summary of Contents for PDI-P26LCDC

Reviews:

Related manuals for PDI-P26LCDC

Brands by name

Popular brands

PDi PDI-P26LCDC, Installation And Operating Instructions Manual

Search results

Summary of Contents for PDI-P26LCDC

Reviews:

Related manuals for PDI-P26LCDC

Brands by name

Popular brands