PDI-P26, 32, 40 TV Installation Guide
Page 4 of 52
Communication Systems Inc.
Better Solutions Are Within Reach™
INSTALLATION and OPERATING INSTRUCTIONS
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 PH +1-937-743-5664
Document Number: PD196I127R1.DOC
FCC, Copyright, Disclaimer, and Trademarks
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a residential or commercial installation. If this equipment does cause harmful interference to
radio or TV reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Copyright
PDI Communication Systems, Inc. claims proprietary right to the material disclosed in this user manual. This manual
is issued for user information only and may not be used to manufacture anything shown herein. Copyright 2009 by
PDI Communication Systems, Inc. All rights reserved.
Disclaimer
The author and publisher have used their best efforts in preparing this manual. PDI Communication Systems, Inc.
makes no representation or warranties with respect to the accuracy or completeness of the contents of this manual and
specifically disclaim any implied warranties or merchantability or fitness for any particular purpose and shall in no
event be liable for any loss of profit or any other damages. The information contained herein is believed to be
accurate, but is not warranted, and is subject to change without notice or obligation.
Trademarks
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
All other brand names and product names used in this manual are trademarks, registered trademarks, or trade names of their
respective holders. PDI and Better Solutions Are Within Reach are registered trademarks of PDI Communication Systems, Inc.,
Springboro, Ohio.
Location Guidelines
The model PDI-P26/P32/P40LCD Hospital Grade LCD TV is a specialized LCD TV. It is intended for entertainment
and educational purposes in a hospital, a nursing home, medical-care center, or similar health-care facility in which
installation is limited to a non-hazardous area in accordance with the National Electrical Code, ANSI/NFPA 70. The
PDI-P26/P32/P40LCD is designed for mounting to PDI manufactured mounts. Installation of the TV on any other
mount is not recommended.
WARNING
: The TV’s VESA mounting holes are
designed for M4 and/or M6 metric screws only. Use of a
non-PDI approved mount or SAE hardware could result in
a condition where the TV could unexpectedly fall and
cause injury or death.
The PDI-P26/P32/P40LCD TV mounts on the wall at the foot of a patient’s bed. Select a location that is near an AC
wall outlet and that does not expose the TV to bright room lights or sunlight, if possible. The LCD TV also requires
connection of both CATV cable signal and across-room wiring for the pillow speaker.
OSHPD (State of California Only)
The combined weight of the PDI-P26/P32/P40LCD TV and PDI wall mount is less than 20 pounds. At the time of this
writing, the involvement of a written, submitted, reviewed, and approved plan by OSHPD is not required to install the
PDI-P26/P32/P40LCD TV in the state of California.
