PDi PDI-P26LCDC Installation And Operating Instructions Manual Download

Page: 26 / 52

PDI-P26, 32, 40 TV Installation Guide

Page 26 of 52

Communication Systems Inc.

Better Solutions Are Within Reach™

INSTALLATION and OPERATING INSTRUCTIONS

PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 PH +1-937-743-5664

Document Number: PD196I127R1.DOC

11.

Press

►

to select Enable/Disable Digital Channel.

NOTE:

If there are not any channels programmed in the Service Level, “No Channels Present” will appear in

the menu.

12.

Press

▲

▼

to highlight the digital channel that needs to be enabled or disabled.

13.

Press

◄

►

to select Enable or Disable.

14.

Press the SETUP button to return to the previous menu.

Clear Service Level

This empties a service level of all its programmed channels, leaving it blank.

Enter the Channels menu

Press

▲

▼

to highlight Clear Service Level.

Press

►

to select it.

Press

▲

▼

to highlight the Service Level (Free, Basic, or Premium).

Press

►

to select the highlighted Service Level.

A confirmation page will appear. Press

▲

to proceed. Press

▼

or SETUP to return to the previous menu.

NOTE:

After a Service Level is cleared, the TV returns to the Clear Service Level menu. “Blank” will

appear to the right of the Service Level.

Press SETUP to return to the previous menu. To exit, press SETUP until the programming menus disappear.

Clear Service Level

■

Free

Programmed

►

■

Basic

Blank

►

■

Premium

Blank

►

Yes:

▲

Exit: SETUP

No:

▼

Channels

■

Signal

Cable STD

■

Auto Program

►

■

Add/Delete Channels

►

■

Clear Service Level

►

■

Copy Service Level

►

■

Parental Control

►

■

Power on Channel

►

■

Channel Lock

Disabled

■

Channel Memory Override

Enabled

Position:

▲▼

Exit: SETUP

Next:

◄►

Enable/Disable Digital Channel

■

28-1

Enable

■

28-2

Disable

■

28-3

Disable

■

28-4

Disable

■

48-1

Disable

■

48-2

Enable

■

88-1

Enable

Position:

▲▼

Exit: SETUP

Next:

◄►

Summary of Contents for PDI-P26LCDC





















































Search results

Summary of Contents for PDI-P26LCDC

Reviews:

Related manuals for PDI-P26LCDC

Brands by name

Popular brands

PDi PDI-P26LCDC, Installation And Operating Instructions Manual

Search results

Summary of Contents for PDI-P26LCDC

Reviews:

Related manuals for PDI-P26LCDC

Brands by name

Popular brands