PDI-P26, 32, 40 TV Installation Guide
Page 30 of 52
Communication Systems Inc.
Better Solutions Are Within Reach™
INSTALLATION and OPERATING INSTRUCTIONS
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 PH +1-937-743-5664
Document Number: PD196I127R1.DOC
Motion Picture Association of USA (MPAA) Rating System
Change Password
The Parental Control access password can be changed using this menu.
NOTE:
The factory default password that is programmed into the TV is 0000.
1.
From the Parental Control menu, enter the Change Password menu.
2.
Enter a new password by using the number buttons on the remote.
3.
Confirm the password by entering the same digits.
NOTE:
After confirming the password, the TV will return to the Parental Control menu.
Aux. Block Source
Like TV programs and channels, the auxiliary sources can be blocked too. When the TV encounters an external
signal source that is not appropriate per its settings, a black screen appears with muted sound.
NOTE:
Parental Lock must be enabled for the sources to be blocked.
1.
In the Parental Control menu, press
▲
or
▼
to highlight Aux. Block Source.
2.
Press
◄
or
►
to select Unblocked or Blocked.
3.
Press SETUP to return to the previous menu. To exit, press SETUP until the programming menus disappear.
Block Hour
This sets how long an enabled Parental Lock will be active.
1.
In the Parental Control menu, press
▲
or
▼
to highlight Parental Lock Duration.
2.
Press
◄
or
►
to select the desired number of hours (1-99) or Always.
3.
Press the SETUP button to return to the previous menu. To exit, press SETUP until the programming menus
disappear.
Change Password
■
Enter Password
---------------
■
Confirm Password
---------------
Exit: SETUP
