PDi PDI-P26LCDC Installation And Operating Instructions Manual Download

Page: 24 / 52

PDI-P26, 32, 40 TV Installation Guide

Page 24 of 52

Communication Systems Inc.

Better Solutions Are Within Reach™

INSTALLATION and OPERATING INSTRUCTIONS

PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 PH +1-937-743-5664

Document Number: PD196I127R1.DOC

Auto Program

The TV automatically scans each available channel for activity. Channels that display activity are memorized into the
selected Service Level.

After setting Signal, press

▲

▼

to highlight Auto Program.

Press

►

to select it.

On Mode, press

◄

►

to select the scope of channel scanning.

Analog Only: TV searches for analog channels only.

Digital Only: TV searches for digital channels only.

Analog and Digital: TV searches for both analog and digital channels.

Press

▲

▼

to highlight Channel Sequence.

Press

◄

►

to select the Channel Sequence in which the channels are displayed.

Interleave A+D: Channels are displayed in the order of channel number.

All A then D: All digital channels are displayed after all analog channels.

Press

▲

▼

to highlight the Service Level (Free, Basic, or Premium) you wish to program. The menu

displays the current programming status of each level as either Programmed or Blank.

NOTE:

A programmed service level can also be reprogrammed if desired.

Press

►

to start auto programming.

A confirmation menu will appear before proceeding. Press

▲

to start auto programming. Press

▼

to cancel

the operation. The TV now will search all available channels. Auto programming requires several minutes to
complete.

NOTE:

Digital channel auto programming may take longer than 10 minutes to complete.

Press the SETUP button to return to normal TV viewing.

Auto Program

■

Mode

Analog Only

■

Channel Sequence

Interleave A+D

■

Add. Digital Signal

None

■

Free

Programmed

►

■

Basic

Blank

►

■

Premium

Blank

►

Position:

▲▼

Exit: SETUP

Next:

◄►

Channels

■

Signal

Cable STD

■

Auto Program

►

■

Auto/Delete Channels

►

■

Clear Service Level

►

■

Copy Service Level

►

■

Parental Control

►

■

Power on Channel

►

■

Channel Lock

Disabled

■

Channel Memory Override

Enabled

Position:

▲▼

Exit: SETUP

Next:

◄►

Summary of Contents for PDI-P26LCDC





















































Search results

Summary of Contents for PDI-P26LCDC

Reviews:

Related manuals for PDI-P26LCDC

Brands by name

Popular brands

PDi PDI-P26LCDC, Installation And Operating Instructions Manual

Search results

Summary of Contents for PDI-P26LCDC

Reviews:

Related manuals for PDI-P26LCDC

Brands by name

Popular brands