Operation Systems
Vitality™ Series | SL- Accent™ Control
39
Show and Set Time of Day
Setting the time-of-day can be important for determining filtration times and other background features. When in the TIME menu,
SET TIME will flash on the display if no time-of-day is set in the memory.
Setting Time:
1) Repeatedly press menu key until set time or time appears on screen.
2) Press up or down arrow to adjust hour.
3) Press light key to switch to minutes.
4) Press up or down key to adjust minutes.
5) Press light key to exit.
If power is interrupted to the system, Time-of-Day is not stored. The system will still operate and all other user settings will be
stored. If filter cycles are required to run at a particular time of day, resetting the clock will return the filter times to the actual
programmed periods.
When the system starts up, it defaults to 12:00 Noon, so another way to get filter times back to normal is to start up the spa at
noon on any given day. SET TIME will still flash in the TIME Menu until the time is actually set, but since the spa started at noon,
the filter cycles will run as programmed.
Restricting
The control can be restricted to prevent unwanted use or temperature adjustments.
Locking the panel prevents the controller from being used, but all automatic functions are still active.
Locking the Temperature allows Jets and other features to be used, but the Set Temperature and other programmed settings
cannot be adjusted.
Temperature Lock allows access to a reduced selection of menu items. These include Set Temperature, FLIP, LOCK, UTIL, INFO and
FALT LOG.
Set Restricting:
1) Press menu key until Lock appears.
2) Press up arrow for temp lock.
3) Press up arrow again to activate temp lock or light key to switch to panel lock.
4) Press up arrow again to activate panel lock.
Unlocking
T
his Unlock sequence may be used from any screen that may be displayed on a restricted panel.
NOTE: If the panel has both an UP and a Down button, the ONLY button that will work in the Unlock Sequence is the UP button.
Set Unlocking:
1) Press and hold up arrow.
2) While pressing and holding up arrow press and release light key twice.
Hold
Hold Mode is used to disable the pumps during service functions like cleaning or replacing the filter. Hold Mode will last for 1 hour
unless the mode is exited manually.
Set Hold:
1) Press menu key repeatedly until hold is displayed.
2) Press up arrow to enter hold.
3) Press down arrow to exit hold.
Summary of Contents for Summit SX15
Page 2: ......
Page 75: ...Operation Systems WAVE Wireless Control option 72...