, Introduction
The Card is a single-chip solution for a PCI to ATA controller. It accepts
host commands through the PCI bus, processes them and transfers data
between the host and ATA devices. It can be used to control two independent
ATA channels: primary and secondary. Each channel has its own ATA bus and
will support up to two ATA/ATAPI devices for amaximum of four devices.
The Card supports up to a 133 MB/sec transfer rate exceeding that which is
specified in ATA/ATAPI-6.
1.1 Features
• Standalone PCI to ATA host controller chip.
• Compliant with PCI Specification, revision 2.2.
• Compliant with PCI IDE Controller Specification, revision 1.0.
• Compliant with Programming Interface for Bus Master IDE Controller,
revision 1.0.
• Compliant with ATA/ATAPI-6 specifications.
•Compliant with UDMA6 ATA/133 Specification
• Driver support for DOS, Win9x, Win ME, NT4, Win2K and XP.
• Supports all necessary test requirements for WHQL.
• Supports the Microsoft driver for generic IDE operations and Intel bus
master DMA operations.
• Supports the full industrial temperature range: -40 o C to +85 o C.
• Supports PCI 33 MHz with 32-bit data.
• Supports two independent ATA channels.
• Supports ATA 133.
• Features one 256-byte FIFO (32-bit x 64 deep) per IDE channel for host
reads and writes.
1.2 Package Content
1.BSD bag X 1
2.User Manual X 1
3.Disk(Driver)X 1
4.IDE Cable X 1
1.3 System Requirement
• CPU: Pentium II / ! ! ! Processor.
• Memory: 32Mbyte.
• DOS, Win9x, Win ME , NT4, Win2K and XP.
1
