Manual
9
5.3
Function guide
5.3.1
ON / OFF
To switch on: Press “
ON / OFF
” and hold it for 3 seconds. The display will show the following:
OPERATION
DISPLAY
Description
ON / OFF
displayed twice, self-diagnostic
programme
displayed twice, shows capacity
current battery voltage is 3.98 V
current software version
stabilisation
capacity (5 t in this case)
Switch-off
1
manual switch-off
Press the “ON / OFF” key for 3 seconds.
2
remote switch-off
Press the “MODE” key on the hand-held display unit to select “Power Off
and hold “Enter” to confirm and switch off the device.
3
automatic switch-off
Select “switch-off” in the parameter settings.
is displayed. When the
device is not operated for 15 minutes it changes into the energy saver mode
and switches off automatically after 60 minutes.
5.3.2
Zero
OPERATION
DISPLAY
When the device is switched on, it normally
displays
. In case it shows small
numbers, press this key.
1
Press “ZERO”
2
Press “ZERO”
5.3.3
TARE
OPERATION
DISPLAY
Attach the tare weight
after switching the
device on and press this
key. “TARE” is
displayed and the
display shows the net
weight from now on
1
Press “Tare”
5.3.4
PEAK HOLD
OPERATION
Description
Press “PEAK”
shows the maximum value
Press “PEAK” again
measured values change again
5.3.5
Data memory
OPERATION
DISPLAY
Description
Press the “MODE” key 5 times
and confirm with “Enter”.
current saving time
first 4 digits of the entire weight
last 4 digits of the entire weight
5.3.6
Data search
OPERATION
DISPLAY
Description
Press “Mode” 6 times. Then
press the “Enter” key.
current saving time
current weight
first 4 digits of the entire weight
last 4 digits of the entire weight
Press the “Mode” key again.
back
