Manual
7
5
Instructions
5.1
Display and keys
5.1.1
LCD display
a) 25 mm (1“) 5-digit LCD display with all functions and units
b)
: Wireless connection signal. Symbol means that the signal is stable. It disappears when no signal is
received and it flashes when the signal is weak.
c)
battery indication.
: full,
: low,
: flat.
d)
PEAK
: current value is the maximum value.
e)
MEM
: appears once when the value is saved in the parameter or calibration memory. When it appears
for a longer period of time, the values are saved in the data memory.
f)
STB
: stable condition.
g)
kN
: “kilonewton”,
N
: “newton”, in taring mode the “N” flashes.
h)
t
: “tonne”.
i)
lb
: “lbs”.
k)
kg
: “kilogrammes”.
5.1.2
Keypad
a)
ON / OFF
1. Press the “
ON / OFF
” key to switch the device on.
2. When the device is switched on, press the “
ON / OFF
” key for 3 seconds to switch the device off.
b)
ZERO
: When the device is switched on without any load attached to the hook and the display still
shows numbers, press this key to set the device to 0.
c)
UNIT
: Press the “UNIT” key to change the unit: “kg” → “lb” → “N” → “kN” → “t” → “kg”.
d
) PEAK
: When you attach a new weight and press the PEAK key, the device will show the maximum
value of this new weight and freezes it into the display. By pressing the key again, you return to normal
measurement.
