PAW FC4.13, Manual For Specialised Craftsman

Page: 11 / 36

11
en
Values and adjustments can be changed in different ways:
current value saved minimum value maximum value
adjusted value
(not yet confi rmed)
adjustment channel
Numeric values can be adjusted by means of a slide bar. The minimum value is
indicated to the left, the maximum value to the right. The large number above the
slide bar indicates the current adjustment. By pressing buttons
❷
or
❹
the upper
slide bar can be moved to the left or to the right.
Only after the adjustment has been confi rmed by pressing button
➄
will the num-
ber below the slide bar indicate the new value. The new value will be saved if it
is confi rmed by pressing button
➄
again, the controller switches to the previous
menu.
inactive area
minimum
value
active area
maximum
value
inactive area
When 2 values are locked against each other, they will display a reduced adjustment
range depending on the adjustment of the respective other value.
In this case, the active area of the slide bar is shortened, the inactive area is indicat-
ed as a dotted line. The indication of the minimum and maximum values will adapt
to the reduction.
If only one item of several can be selected, they will be indicated with "radio but-
tons". When one item has been selected, the radio button in front of it is fi lled. If
button
➄
is pressed, the selection is confi rmed and the controller switches to the
previous menu.
Some selection possibilities are displayed with checkboxes. When an item has been
selected, an x appears inside the checkbox.