Page 56
69-70
34
(*)Fixed tare, channel A (LSW)
INT. value - Least significant word
71-72
35
(*) Multirange 1, channel A (MSW) INT. value - Most significant word
73-74
36
(*) Multirange 1, channel A LSW)
INT. value - Least significant word
75-76
37
(*) Multirange 2, channel A (MSW) INT. value - Most significant word
77-78
38
(*) Multirange 2, channel A (LSW)
INT. value - Least significant word
79-80
39
(*) Weight division value, channel B See relevant table.
81-82
40
(*) Decimali, canale B
See relevant table.
83-84
41
(*) Load cell capacity, channel B
(MSW)
INT. value - Most significant word
85-86
42
(*) Load cell capacity, channel B
(LSW)
INT. value - Least significant word
87-88
43
(*) Load cell Sensitivity, channel B
INT. value.
89-90
44
(*) Fixed tare, channel B (MSW)
INT. value - Most significant word
91-92
45
(*) Fixed tare, channel B (LSW)
INT. value - Least significant word
93-94
46
(*) Multirange 1, channel B (MSW)
INT. value - Most significant word
95-96
47
(*) Multirange 1, channel B LSW)
INT. value - Least significant word
97-98
48
(*) Multirange 2, channel B (MSW)
INT. value - Most significant word
99-100
49
(*) Multirange 2, channel B (LSW)
INT. value - Least significant word
(*) These registers can only be modified in case of FREE operation or in case of METRIC operation
with calibration bridge enabled.
WRITING EXAMPLES
Follow the example below to write the set-up parameters:
Write the value HEX 3FFF in bytes 1-2 (Command Register) to open the internal writing area of the
MC 315.
Example: The MC 315 is set with factory values. The values of Cell Capacity, Cell sensitivity, and di-
vision are to be changed to 15000, 2.9965, and 2 respectively.
Capacity
Byte 17
Byte 18
Byte 19
Byte 20
Hex
00
00
3A
98
Sensitivity
Byte 21
Byte 22
Hex
75
0D
Division
Byte 23
Byte 24
Hex
00
0A
Save the data by writing the value HEX 7 in Bytes 1-2.
NOTE: The MC 315 does not accept values equal to the existing one.
The internal writing area of the MC 315 does not need to be enabled for Zero-point Calibration.
Summary of Contents for MC 315 Series
Page 2: ...Page II ...
Page 61: ...Page 59 ...
