Page 32
COM 4 PARAMETERS WITH A PROFINET / ETHERCAT IN PLACE
En.FbuS.
FIELDBUS ENABLING
Enabling of PROFINET / ETHERCAT field bus; if OFF, no error messages concerning Fieldbus commu-
nication are displayed:
Selectable values:
OFF; ON
Default: OFF
inP.rEG.
INPUT AREA SIZE
Input area size for field bus (value in Bytes).
Selectable values:
32, 64, 96, 128
Default: 128
out.rEG.
OUTPUT AREA SIZE
Output area size for field bus (value in Bytes).
Selectable values:
32, 64, 96, 128
Default: 128
AddrES
COMMUNICATION ADDRESS
Communication address of the unit:
Values: 1 to 32
Default: 1
In case of PROFINET field Bus, the XML configuration file “GSDML-V2.3-HILSCHER- NIC 50-RE PNS 32-
20160122.xml” is provided. The size of the input and output areas set in the PLC (possible selections:
32, 64, 96 o 128 byte) should match with the size of the input and output areas selected in the unit
(“INP.REG.” and “OUT.REG.” parameters).
The units are supplied with the “Profinet Name” parameter not configured and with IP address 0.0.0.0.
In case of ETHERCAT field Bus: the units should be connected ring-wise (as per EtherCAT specification);
please refer to the installation manual for use of the INPUT and OUTPUT ports.
Four different XML configuration files are provided:
“Hilscher NIC 50-RE ECS V2.2 32 Byte.xml” (input area 32 bytes, output area 32 bytes).
“Hilscher NIC 50-RE ECS V2.2 64 Byte.xml” (input area 64 bytes, output area 64 bytes).
“Hilscher NIC 50-RE ECS V2.2 96 Byte.xml” (input area 96 bytes, output area 96 bytes).
“Hilscher NIC 50-RE ECS V2.2 128 Byte.xml” (input area 128 bytes, output area 128 bytes).
The file corresponding to the size of the input and output areas selected in the unit should be imported
into the PLC (e.g., if InP.rEG.=128 and oUt.rEG.=128 is set in the unit, file “Hilscher NIC 50-RE ECS V2.2
128 Byte.xml” should be imported into the PLC). Multiple files of different sizes can be imported, but in
this case the automated search and configuration function of the network devices cannot be executed.
Summary of Contents for MC 315 Series
Page 2: ...Page II ...
Page 61: ...Page 59 ...
