14
Models 2603, 2621, and 2635 User Manual
Safety when working with electricity
WARNING
In accordance with the requirements of council directive 2002/96/
EC on Waste of Electrical and Electronic Equipment (WEEE),
ensure that at end-of-life you separate this product from other
waste and scrap and deliver to the WEEE collection system in
your country for recycling.
General observations
•
Clean the case with a soft slightly moist anti-static cloth
•
Place the unit on a flat surface and ensure free air circulation
•
Avoid exposing the unit to direct sunlight and other heat sources
•
Protect the unit from moisture, vapors, and corrosive liquids
•
This device contains no user serviceable parts. The equipment
shall be returned to Patton Electronics for repairs, or repaired by
qualified service personnel.
•
Mains Voltage: Do not open the case the when the power cord is
attached. Line voltages are present within the power supply when
the power cords are connected. The mains outlet that is utilized to
power the devise shall be within 10 feet (3 meters) of the device,
shall be easily accessible, and protected by a circuit breaker.
•
For AC powered units, ensure that the power cable used meets all
applicable standards for the country in which it is to be installed,
and that it is connected to a wall outlet which has earth ground.
•
For units with an external power adapter, the adapter shall be a
listed Limited Power Source.
•
Hazardous network voltages are present in WAN ports regardless
of whether power to the unit is ON or OFF. To avoid electric shock,
use caution when near WAN ports. When detaching the cables,
detach the end away from the device first.
•
Do not work on the system or connect or disconnect cables during
periods of lightning activity.
