Introduction
95
Models 2603, 2621, and 2635 User Manual
10
• System Configuration
Introduction
The
System Configuration
item on the Configuration Menu opens to provide access to twelve (12) different
items. They are:
•
Authentication: allows you to control access to the OnSite device’s console and web configuration pages.
•
Alarm: shows the Alarm Table and CPU Usage Settings. You can configure the alarm severity for each of the
alarms and enable/disable the Alarm Error Log.
•
Remote Access: enable and set the time limit for a remote user to have access to the OnSite.
•
Update: update the OnSite software from here.
•
Save: to save the OnSite configuration in non-volatile memory.
•
Backup/Restore: used to save the OnSite device’s configuration on a PC or to load a configuration already
saved on a PC.
•
Restart: to do a soft start of the OnSite or to restore the OnSite to factory defaults.
•
Key: the key version is used to identify which features are installed in the OnSite.
•
Website Settings: configures the refresh rate of the web pages.
•
Error Log: displays the Syslog Settings and shows recent configuration errors from the OnSite.
•
SNMP Daemon: to modify the SNMP parameters for the OnSite.
•
Tools: provides ‘ping’ and ‘traceroute’ commands from the OnSite. Also used to clear the interface table
counters.
