OnSite Series High Speed Routers overview
17
Models 2603, 2621, and 2635 User Manual
1
• General Information
OnSite Series High Speed Routers overview
The OnSite Series of gateway routers/bridges combine full set of high-speed IP routing features and WAN
access via PPP/IP/FR protocols. All OnSite routers come with an auto-sensing full-duplex 10/100Base-T
Ethernet port, MDI-X cross-over switch, console port, and internal or external power supply. There are three
versions in the OnSite series corresponding to a choice of WAN interface:
•
The Model 2603 is equipped with an integrated T1/E1 CSU/DSU for connection to full and fractional T1/
E1 services.
•
The Model 2621 is equipped with DTE/DCE user configurable X.21 interface.
•
The Model 2635 equipped with a V.35 interface presented on a female DB-25 connector and a cable to
convert to an M34/F.
The OnSite routers provide selectable bridging or routing functionality along with advanced IP features such as
NAT/NAPT, Firewall, and DHCP. A complete set of configurable PPP/IP/FR WAN protocols allow a wide
range of choices when connecting branches via common WAN services. The OnSite routers boast easy installa-
tion offering Console/VT-100, Telnet, HTTP, and SNMP management options.
The following sections describes the OnSite series features and capabilities:
•
General attributes, see section
“General attributes”
•
Ethernet, see section
“Ethernet”
on page 18
•
Protocol support, see section
“Protocol support”
on page 18
•
PPP support, see section
“PPP Support”
on page 18
•
Management, see section
“Management”
on page 18
•
WAN interface, see section
“WAN Interfaces”
on page 18
•
Security, see section
“Security”
on page 19
•
Front panel status LED see section
“Front Panel Status LEDs and Console Port”
on page 19
General attributes
•
Compact, low cost router/bridge
•
10/100 Ethernet
•
Comprehensive hardware diagnostics. Easy maintenance and effortless installation.
•
Plug-and-Play operation for fast and seamless turn-up with pre-configured WAN and LAN options.
•
Built-in web configuration.
•
Setup allows for standard IP address and unique method for entering an IP address and mask
without
requiring a console connection. Default IP address of 192.168.1.1/24.
•
Simple software upgrades obtained via FTP.
•
Front panel LEDs indicate
Power, WAN,
and
Ethernet LAN
speed and status.
•
Convenient and standard RJ connectors for
Ethernet
,
Line
, and
Console
.
•
Standard one-year parts and labor warranty.
