Save
99
Models 2603, 2621, and 2635 User Manual
10
• System Configuration
Figure 73. Updating software
Clicking on
Options
provides for selecting ‘Firmware Update Configuration.’ If enabled, the OnSite will pre-
vent updating with incorrect software.
Save
To save configuration changes to non-volatile memory, it is essential to click on the Save button on this web-
page. (See
figure 74
.) If you do not do this, all configuration changes are stored only in volatile memory, mean-
ing that if the OnSite is restarted, all configuration changes are lost. Click on the Save button and wait until
seeing the message “Saved information model to im.conf.”
Figure 74. Save configuration changes in non-volatile memory
Backup/Restore
You may save or use previously saved configurations from this webpage. Should you want to save a specific
application configuration from the OnSite, click on
Backup configuration to your computer
.
To reload a previously saved configuration file (.icf ), browse and select the file from your computer. Click on
the Restore button to load into the OnSite. (See
figure 75
.)
