12
About this guide
This guide describes installing and configuring Patton Electronics OnSite Series High Speed Routers. The
instructions in this guide are based on the following assumptions:
•
The router may connect to a serial DTE device or T1/E1 line
•
There is a LAN connected to the Ethernet port of the router
Audience
This guide is intended for the following users:
•
Operators
•
Installers
•
Maintenance technicians
Structure
This guide contains the following chapters and appendices:
•
Chapter 1
on page 16 provides information about router features and capabilities
•
Chapter 2
on page 23 contains an overview describing router operation
•
Chapter 3
on page 26 provides initial configuration procedures
•
Chapter 4
on page 38 describes configuring the Ethernet LAN interface
•
Chapter 5
on page 42 describes configuring the serial WAN interfaces
•
Chapter 6
on page 48 describes configuring WAN services
•
Chapter 7
on page 66 describes configuring security for the router
•
Chapter 8
on page 80 describes DHCP and DNS configuration
•
Chapter 9
on page 91 describes configuring IP services
•
Chapter 10
on page 94 describes system configuration
•
Chapter 11
on page 103 describes SNTP client configuration
•
Chapter 12
on page 107 provides a summary of the OnSite device’s status webpage and status LEDs
•
Chapter 13
on page 111contains information on contacting Patton technical support for assistance
•
Appendix A
on page 114 contains compliance information for the OnSite routers
•
Appendix B
on page 116 contains specifications for the routers
•
Appendix C
on page 120 provides cable recommendations
•
Appendix D
on page 122 describes the router’s ports
•
Appendix E
on page 127 describes how to use the command line interface (CLI)
For best results, read the contents of this guide
before
you install the router.
