Hardware Installation
36
Models 2603, 2621, and 2635 User Manual
3
• Initial Configuration
ip list interfaces <enter>
[To see if the change in IP address is correct]
system config save <enter>
[To save the new IP address in flash memory.]
The IP address has now been successfully changed.
Web Operation and Configuration
Now that the IP address has been configured for your application, you can complete the configuration using
any standard web browser.
PC Configuration
In order to connect the PC to the Ethernet LAN to communicate with The OnSite Series router, the PC’s IP
address should be on the same subnet as the router.
Connect a straight-through Ethernet cable between the PC’s NIC or PCMCIA Ethernet card and an Ethernet
hub or switch.
Web Browser
Do the following:
1.
Launch a standard web browser such as Netscape Communicator or Internet Explorer (IE).
2.
Enter the OnSite router’s IP address into the URL or Address field of the browser.
To see the OnSite Series router home page, refer to the following Figures. Model 2603 is shown in
figure 14
.
Model 2621 in
figure 15
. Model 2635 in
figure 16
.
Figure 14. Model 2603 home page
