Configuring Inbound Access Rules
74
BODi rS BD1000 User Manual
6 • Configuring Inbound Access & NAT Mappings
Inbound Access Services
To configure inbound access services, click on
Network > Inbound Access > Services
. At least one server must
be defined before services can be added.
Figure 48. Network > Inbound Access > Services
To define a new service, click the
Add Service
button to show the following window:
Figure 49. Network > Inbound Access > New Service
Table 29. Inbound Access Services: New Service Settings
Field
Description
Enable
Specifies whether the inbound service rule takes effect.
Select
Yes
for the inbound service rule to take effect. If the inbound traffic
matches the specified IP Protocol and Port, the BD1000 will take action based
on the other parameters of the rule.
Select
No
to disable the inbound service rule. The BD1000 will disregard the
other parameters of the rule.
Service Name
Identifies the service to the System Administrator. Valid values for this setting con-
sist only of alphanumeric and the underscore “_” characters.
