Configuring the LAN Interface
34
BODi rS BD1000 User Manual
3 • Configuring LAN & WAN Interfaces
IP Settings
Drop-in Mode Settings
Note
Refer to
on page 37 for detailed infor-
mation on using the BD1000 and Drop-in mode.
Table 4. LAN: IP Settings
Field
Description
IP Address
The IP address for the Ethernet LAN management port.
Subnet Mask
The subnet mask for the Ethernet LAN management port.
Speed
The speed of the Ethernet LAN management port.
By default,
Auto
is selected and the appropriate data speed is automatically
detected by the BD1000.
In the event of negotiation issues, the port speed can be manually specified to cir-
cumvent the issues. You can also choose whether or not to advertise the speed to
the peer by selecting the
Advertise Speed
checkbox.
Table 5. LAN: Drop-in Mode Settings
Field
Description
Enable
Check the box to enable the Drop-in Mode feature.
Drop-in Mode eases the installation of the BD1000 on a live network between
the existing Firewall and Router, such that no configuration changes are
required on existing equipment.
WAN for Drop-in Mode
Select the WAN port to be used for Drop-in mode. If the WAN port for LAN
Bypass is selected, High Availability feature will be disabled automatically.
WAN Default Gateway
Enter the WAN router's IP address in this field. If there are more hosts other
than the router on the WAN segment, check the box
I have other host(s)
on WAN segment
and enter the IP address of the hosts that needs to
access LAN devices or to be accessed by others.
WAN DNS Servers
Enter the selected WAN's corresponding DNS server IP addresses.
