Viewing the Front Panel
58
FS6300 NMS Getting Started Guide
6 • Configuring the 3096RC Card
•
G.SHDSL Port Configuration – See
“Configuring G.SHDSL Ports”
on page 63
•
G.SHDSL Report – See
“Viewing G.SHDSL Reports”
on page 67
•
Inband Channel Management-T1/E1 – See
“Managing Inband T1/E1 Channels”
on page 73
•
IP Routing – See
“Configuring IP Routing”
on page 68
•
Operator Action – See
“Managing Operator Actions”
on page 40 in
Chapter 4
•
PPP Configuration – See
“Viewing the System Log”
on page 69
•
System Log – See
“Viewing the System Log”
on page 69
•
T1E1 Port Configuration – See
“Configuring the T1/E1 Ports”
on page 70
•
T1E1 Reports – See
“Viewing T1/E1 Reports”
on page 74
•
Re-Discover Card – See
“Re-Discovering Cards”
on page 27 in
Chapter 2
•
Display T1E1 Map Layer – See
“Viewing the T1/E1 Map Layer”
on page 75
•
Display G.SHDSL Map Layer –
“Viewing the G.SHDSL Map Layer”
on page 75
•
UnManage – See Chapter 9,
“Monitoring Managed Objects”
on page 97
Viewing the Front Panel
Click on
Card Front Panel GUI
to view the front panel of the card in real-time.
Figure 40. 3096RC Front Panel LEDs
Configuring the Card System
Click on
Card System Configuration
to configure system parameters. You can also view the system status, eth-
ernet status, system parameters, SNMP/HTTP parameters, and system status details.
Modify System Parameters
If you only want to view the system parameters, click on
View System Parameters
in the Card System Config-
uration window.
To configure the card system, click on
Modify System Parameters
in the menu tree in the Card System Con-
figuration window (see
Figure 39
on page 57).