![background image](http://html2.mh-extra.com/html/patton-electronics/foresight-6300-nms/foresight-6300-nms_getting-started-manual_4037293081.webp)
Configuring E1 Links
81
FS6300 NMS Getting Started Guide
7 • Configuring the 6511RC Card
Configuring E1 Links
Click on
E1 Link
to configure the line interface, alarm status, DS0 settings, and test settings.
Edit Line Interface Settings
Click on
Line Interface
(under Current Configuration) in the menu tree for the E1 Link window, then select
the links you want to edit from the
TUG3
,
TUG2
, and
TU
drop-down menus. Make the desired changes,
then click
Submit
.
View Alarm Status
Click on
Alarm Status
(under Current Configuration) in the menu tree for the E1 Link window, then select
the links you want to view alarms for from the
TUG3
,
TUG2
, and
TU
drop-down menus.
View Line Statistics
You can view Current, Past, and Total Line Statistics for a link. Navigate to
Near End Line Statistics > Cur-
rent
,
Near End Line Statistics > History
, or
Near End Line Statistics > Totals
in the menu tree for the E1
Link window, then select the links you want to view from the
TUG3
,
TUG2
, and
TU
drop-down menus.
Configure DS0 Settings
Enable/Disable DS0 Numbers
Click on
DS0 Configuration > Details
in the menu tree for the E1 Link window, then select the links you
want to configure from the
TUG3
,
TUG2
, and
TU
drop-down menus (see
Figure 65
on page 82).