Configuring the Alarm Trap Manager
30
FS6300 NMS Getting Started Guide
3 • Configuring Alarms and Clocking
4.
Enter the IP address of the NMS server in the
Alarm Trap Manager 1
field.
5.
Click the
Modify
button.
6.
If the configuration was successful, a “Configuration Result” window displays. Click
OK
.
Configuring Alarms through a Card in the Chassis
To configure the IP address for the Alarm Trap field for each card:
1.
From the menu tree on the left side of the screen, select the
Chassis
for the card that you want to config-
ure.
2.
In the main window, right-click on the
Card
, then select
Alarm Parameter Configuration.
The
FS6300 Alarm Details
window appears. Click on the
Alarm System Overview
to view information
about the alarms.
Figure 10. View Alarm Details
Alarm System Overview
: The Alarm System Overview window shows the entire alarm system, including
the following information for each alarm:
– Alarm Name
– Alarm Severity
– Time Since Alarm
– Count– the number of times this alarm has occurred since being cleared
