![background image](http://html2.mh-extra.com/html/patton-electronics/foresight-6300-nms/foresight-6300-nms_getting-started-manual_4037293026.webp)
Configuring Multiple Cards
26
FS6300 NMS Getting Started Guide
2 • Discovering Your Network
Note
After clicking Update, it is very important to save this information in the
cards’ non-volatile memory so that the values will not be lost in case of a
power failure or card reboot.
Saving the Configuration
To save the information to non-volatile memory:
1.
Click on
Record Current Configuration
in the menu tree on the left side of the screen. This will save all
current configurations in non-volatile memory for the devices listed in the panel on the right side of the
screen.
Figure 7. Multiple Card Configuration > Record Current Configuration
Forcing Discovery for Selected Cards
Though the cards have the updated information saved, the NMS will not display the changes until the cards
have been re-discovered. To re-discover specific cards and not the entire subnet, see
“Re-Discovering Cards”
on
page 27.