Cable installation
25
Model 2616RC T-DAC User Manual
2 • Hardware installation
Figure 10. WAN cable‘s 68-pin SCSI connector
1.
Connect the 68-pin SCSI connector (see
figure 10
) of the 6-foot WAN cable (see
figure 9
on page 24) to
the connector on the rear panel of the Model 2616RC.
2.
Connect the WAN cable RJ-45 connectors (see
figure 11
) to the corresponding ports on a patch panel or
local T1/E1 device.
Figure 11. RJ-45 plug
Table 4. RJ-45 plug pin-out
Description
Pin
Transmit pair (TX)
1
Transmit pair (TX)
2
Receive pair (RX)
4
Receive pair (RX)
5
