8 • Monitoring Status
Model 3201 G.SHDSL Integrated Access Device User Guide
100
Status LEDs
Status LEDs
The LEDs indicate the status of the Power, the WAN (DSL) inter-modem link, and the Ethernet connection.
All LED indicators will present the same looking profile (e.g., clear) when unlit due to being single color, water
clear, high-efficient Yellow LEDs.
Table 5. Status LED descriptions
Power
Yellow
ON indicates that power is applied.
off indicates that no power is
applied.
2 Hz flash occurs during POST
1 Hz flash occurs for non-fatal error.
8 Hz flash on
all LEDs
for fatal
POST outcome or critical error.
WAN
(DSL)
Link
Yellow
Solid yellow: connected
2 Hz flash: training
8 Hz flash: DSL error
No indication: no signal detected.
TX
Yellow
Flashing: when transmitting data
from the unit to the WAN.
RX
Yellow
Flashing: when receiving data from
the WAN to the unit.
Ethernet
Link
Yellow
On: Ethernet is linked.
100M Yellow
On: 100 Mbps Ethernet is selected.
TX
Yellow
Flashing: when data is transmitted
from the unit to the LAN.
RX
Yellow
Flashing: when data is received from
the LAN.
Summary of Contents for DIAMONDLINK 3201
