DSLAM Connections with remote CPE units
49
Model 3201 G.SHDSL Integrated Access Device User Guide
4 • Basic Application Configurations
The other fields should be:
– Destination:0.0.0.0
– Gateway:192.168.164.3
– Mask:0.0.0.0
– Cost:1
– Interface:[blank]
4. Go to G.SHDSL in the Configuration Menu, then the submenu Status. The Modem State should be
“deactivated.” (If not, go to the Action and change it to deactivate.)
Then in the Action submenu under G.SHDSL, change Action to
Start
, then click on
Action
.
Model 3201 (Central) Configuration Steps (RFC 1483 Routed)
From the command line interface (CLI) via the RS-232 control port,
→
ip list interfaces
→
pppoh clear transports
One IP interface was called ip1 with an IP address of 192.168.1.1
Summary of Contents for DIAMONDLINK 3201
