Patton electronics DIAMONDLINK 3201, User Manual

Page: 42 / 128

4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide
40 DSLAM Connections with remote CPE units
Change Terminal Type to Central and Interface Type to atm. Click on the
Configure
button.
In the Action submenu under G.SHDSL, change Action to
Deactivate
, then click on Action.
Return to Action, select
Start
and click on
Action
.
Model 3201 (Central) Configuration Steps (RFC 1483 Bridged)
Although the some parametric values may vary from the desktop’s Model 3201, the process is identical.
From the command line interface (CLI) via the RS-232 control port,
→
ip list interfaces
One IP interface is called ip1 with an IP address of 192.168.1.1
Change the IP address so it is in the same subnet as both PCs. For example, to 192.168.100.3
→
ip set interface ip1 ipaddress 192.168.100.3 255.255.255.0
1. Now you can bring up the web-page management system on your browser by entering the IP address of
the 3201.
2. On the Menu, go to Configuration, then to WAN Connections. Delete the factory default WAN services
already defined.
Click on
Create a new service
in the main window, select
RFC_1483_Bridged
and click on the
Configure
button.
In the Description field, enter the description you wish. In this example, it is called RFC 1483 B.
Leave VCI as 35 and Encapsulation Method as LLC/SNAP. Then click on
Apply
.
3. Go to G.SHDSL in the Configuration Menu, then the submenu Configuration.
Leave Terminal Type as Remote, but change Interface Type to atm. Click on the
Configure
button.