1 • General Information
Model 3201 G.SHDSL Integrated Access Device User Guide
14
Front Panel Status LEDs
Front Panel Status LEDs
The IpRocketLink routers have all status LEDs on the front panel of the unit, and all electrical connections are
located on the rear panel.
Figure 1. Model 3201
The status LEDs from left to right are (see table 3 for LED descriptions):
•
Power
•
WAN Link, Tx, and Rx
•
Ethernet Link, 100M, Tx, and Rx
Rear panel connectors and switches
On the rear panel from left to right are the following:
•
Power input connector
•
Console Port
•
Ethernet connector
•
MDI-X switch
•
Line connector
Table 3. Status LED descriptions
Power
Yellow
ON indicates that power is applied. Off indicates that no power is applied.
2 Hz flash occurs during POST
1 Hz flash occurs for non-fatal error.
8 Hz flash on
all LEDs
for fatal POST outcome or critical error.
WAN
(DSL)
Link
Yellow
Solid yellow: connected
2 Hz flash: training
8 Hz flash: DSL error
No indication: no signal detected.
TX
Yellow
Flashing: when transmitting data from the unit to the WAN.
RX
Yellow
Flashing: when receiving data from the WAN to the unit.
Ethernet
Link
Yellow
On: Ethernet is linked.
100M
Yellow
On: 100 Mbps Ethernet is selected.
TX
Yellow
Flashing: when data is transmitted from the unit to the LAN.
RX
Yellow
Flashing: when data is received from the LAN.
Summary of Contents for DIAMONDLINK 3201
