4 • Basic Application Configurations
Model 3201 G.SHDSL Integrated Access Device User Guide
76
DSLAM Connections with remote CPE units
Model 3201 (Central) Configuration Steps (IPoA Routed)
From the command line interface (CLI) via the RS-232 control port:
→
ip list interfaces
One IP interface was called ip1 with an IP address of 192.168.1.1 Change the IP address so it is in the same
subnet as both PCs. For example, to 192.168.172.3. The default IP mask is 255.255.255.0.
→
ip set interface ip1 ipaddress 192.168.172.3 255.255.255.0
1. Now you can bring up the web-page management system on your browser by entering the IP address of
the 3201.
2. On the Menu, go to Configuration, then to WAN Connections. Delete the factory default WAN services
already defined.
Click on
Create a new service
in the main window, select
IPoA_Routed
and click on the
Configure
button.
In the Description field, enter the description you wish. In this example, it is called IPoA Routed.
– VPI:0
– VCI:700
– WAN IP address: 192.168.164.3
Click on
Apply
.
Summary of Contents for DIAMONDLINK 3201
