7900-A2-GZ42-00
October 2002
1
Hotwire
®
TDM SDSL Standalone Termination Unit, Model 7974
Wall Mounting Installation Instructions
Document Number 7900-A2-GZ42-00
October 2002
Wall mounting the Hotwire 7974 TDM SHDSL Standalone Termination Unit
requires two wood screws suitable for the weight of the fully cabled unit into a
wood surface. Two sets of 1/2-inch (12.7 millimeters) screws with 0.265-inch
(6.73 millimeters) diameter heads are included. However, if you are installing the
unit on a surface other than wood (such as drywall), longer screws are required
(not provided).
The unit can be mounted as follows:
Horizontally, with the LEDs facing up
Vertically, with the LEDs facing toward the left
See the procedure on the next page to install the Model 7974 unit on a wall.
