Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
Center Formed Paddle
CS-P021
3
1
5-3/4" for 15" Paddle
CSP150
3
2
10" for 19" Paddle
CSP151
3
2.1
Hex Button Head Screw
B1/4x.75BHStainless
9
3
Nylock Nut
N1/4NYL
9
4
Nylock Nut
N3/8NYL
12
5
Hex Bolt
B3/8x3/4
12
6
Minden Machine Shop Inc.
1302 K Road Minden, NE
800-264-6587 / 308-832-0220
2
3
4
6
5
1
Mounting Center Paddle to the Front Tube
1.
Attach the plastic paddles (Item 2 - 2.1 depending upon style) to the steel
frame (Item 1) using hex button cap screw (Item 3) and the nuts (Item 4).
2.
Assemble two paddles (Item 1 and 2 assembled) using the 3/8" bolts and nuts
(Item 5 and 6). Do not tighten completely.
3.
Fit the paddle assembly over the front tube in the center of the tube. Add the
third paddle with the 3/8" bolts and nuts. Tighten the bolts lightly. This
completes the paddle set. The center paddle set will be aligned in the center
of the feeder house or the center of the middle corn snout on the corn head.
4.
The center paddle will need to be timed to the other paddle sets.
5.
The center paddle set will be set 30 degrees from the other paddle sets
(basically the paddles will be half way between the other paddle sets). Refer
to the Machine Layout Guide for an illustration.
6.
Once the center paddle is correctly timed, tighten the 3/8" bolts and nuts to
keep the center paddle in place.
Crop Sweeper V 10.0
45
