Control Box Installation
Electric Power Cord
1.
Route Power Cord of Control Box (CSP12B) underneath and into the inside of the cab.
2.
Mount Control Box to console and plug into lighter outlet.
3.
Attach wiring harness to the connectors that control each of the functions; stripper
plates, and reel Fore/Aft, Up/Down, and On/Off. (The reel On/Off switch is installed in
the control box and the necessary wiring is in the harness but the reel control valve
(CSP12C) is optional and must be ordered separately if wanted.)
4.
Plug harness wire together close to combine hydraulic connection block.
5.
Use plastic ties to hold electrical wiring and hoses neatly in place.
Crop Sweeper V 10.0
65
