PATON
PRO-315
MMA/TIG/MIG/MAG
-10 -
WARNING! When using the machine with a supply voltage higher than
450 V, all manufacturer’s warranty obligations expire!
The mains connector, the power supply cable sections, and the mains fuses
must be selected on the basis of the machine specification.
2.4 MAINS PLUG CONNECTION
WARNING! The mains plug must correspond to the supply voltage and
the current consumption of the welding machine (see the specification).
According to safety measures, it is necessary to use guaranteed grounding,
while it is forbidden to use the neutral wire of the supply mains as grounding!!!
3. MANUAL METAL ARC WELDING WITH A STICK
ELECTRODE (MAW «MMA»)
The procedure for preparing the machine to work:
- insert the cable of the electrode holder to the source
A “+”
socket;
-
insert the “ground” terminal cable into the source
B “
-
”
socket;
- connect the "ground" terminal to the
product
;
- connect the mains cable to the three-phase mains;
- put the automatic switch
7
on the rear panel in the “I” position;
- using button
4
, set the welding mode MAW "MMA", the modes are switched in a
circle;
- using buttons
2
, set the current main parameter - arc current;
- if necessary, you can adjust the additional functions of the welding process (for
the order of change, see clause 6.1).
Warning!
In the MAW “MMA” welding mode, after the main switch is turned to the
“I” position, the stick electrode is under voltage. Do not touch the cond
uctive or
grounded objects with an electrode, such as, for example, the welding machine
Electrode holder
Ground terminal
Product
