PATON
PRO-315
MMA/TIG/MIG/MAG
-8 -
c) semi-automatic welding in protective gases SA "MIG/MAG".
5
- machine operation indicator:
a) constantly glows with green - in the presence of open-circuit voltage
(mainly seen at MAW "MMA");
b) constantly shines with yellow - in the standby mode, the operator's
actions during semi-automatic and argon-arc welding, as well as when
the source is overheated in any mode;
c) blinks with green and yellow - during welding in any mode;
d) constantly glows with red - in case of malfunctions;
e) does not glow - in case of malfunctions, as well as when the mains
voltage drops below the standard.
6
- A connector for supplying signals from the wire feeder to turn the source on
and off.
7
- Relay for turning the source on and off.
A
- Bayonet type power socket "+":
a) during MAW “MMA” welding
- the electrode holder cable is connected (in
rarer cases when using special electrodes, the “ground” cable is
connected);
b) during ARG “TIG” welding
-
only the “ground” cable is connected;
c) during semi-
automatic welding SA “MIG/MAG” with
solid
wire - the feed
mechanism cable is connected;
d) during semi-
automatic welding SA “MIG/MAG” with
flux
wire - the
“ground” cable is connected.
B
- Bayonet type power socket "-":
a) during MAW “MMA” welding
-
the “ground” cable is connected (in rarer
cases, when using special electrodes, the electrode holder cable is
connected);
b) during ARG “TIG” welding
- only the argon torch is connected;
c) during semi-
automatic welding SA “MIG/MAG” with
solid
wire - the
“ground” cable is connected;
d) during semi-
automatic welding SA “MIG/MAG” with
flux
wire - the feeder
cable is connected.
