pathway VIA PWVIA RM P12, User Manual

Page: 74 / 100

July 2021
67
PWVIA RM P12 Ethernet Switches - Manual
Menu Item Description
Server Config
Shows if currently entered DHCP Server Pool entires are valid. This property is not editable,
it is simply a check to ensure DHCP Server is setup correctly.
Valid : Pool range is valid and can be applied.
Invalid : Pool range is invalid. Try again.
Enable Server and
Exit Accept the designated pool and start the DHCP Service. Option only available if the Server
Config is valid.
Revert and Exit Abandon configuring the DHCP server and return to previous menu.
Disable Server and
Exit
Turn DHCP server off.
Warning : Devices relying on dynamically-obtained IP addresses require an active DHCP
server to function.
VLAN CONFIG/STATUS: IGMP AND MULTICAST GROUPS
When using multicast data packets, such as streaming ACN (sACN), bandwidth efficiency may be improved by using IGMP
(Internet group management protocol) to enable multicast filtering.
VLAN 1
IGMP Snooping
IGMP Querier: Disabled
Current Multicast Groups
<Back>
Menu Item Description
IGMP Snooping
Allows the switch to correctly filter multicast traffic.
Disabled (Default)
Enabled (Each switch having devices that can use IGMP should have this enabled)
IGMP Querier
Creates the multicast tables used by IGMP Snooping.
Disabled (Default)
Enabled (Each network should have two Queriers)
Current Multicast
Groups Shows the table of multicast groups in use on the VLAN. Use the knob to scroll through the
list and click the knob on a group to see which ports are subscribers to that group.
<Back> Return to previous menu.