PWVIA RM P12 Ethernet Switches - Manual
July 2021
74
PORT STATUS AND CONFIGURATION MENU
Port Status may be reviewed by turning to encoder knob to reach the desired port, from the main screen showing the switch
name and IP address. The LCD shows the following information.
<Switch Name>
IP: 10.30.142.169/8
<Port Name>
Port <x>: <Link Speed>
<VLAN ID#>
The Port’s soft label is shown on the top line. By default, the label is the port number. Below is shown the port number and
the link status or speed. If VLANs are enabled, the bottom line shows the VLAN ID# currently assigned to the port.
From the Port Status screen of the desired port, push the button. The Port Configuration menu will be shown.
Port <x> Configuration
VLAN: Untagged (Normal)
VLAN ID: <x>
Art-Net Handler: Trap to ssACN
PoE: Enabled
PoE Setup/Status
Link Mode: Auto Negotiate
Network Partner (LLDP)
Bandwidth Use: 1%
Current Multicast Groups
<Back>
Some menu items may not be displayed; i.e. VLANs, Network Partner (LLDP), Current Multicast Groups, if VLANs are not
enabled, or LLDP-compliant devices are not detected.
VLAN
VLANs must be enabled from the
Advanced Settings
menu for this option to be shown.
Menu Item
Description
Untagged (Normal)
Only data belonging to the port’s specified VLAN ID# will be transmitted. Typically connected
to end equipment
Tagged (Uplink)
All traffic on all VLANs will be transmitted. Typically connected to another switch.
<Back>
Return to previous menu.
Summary of Contents for VIA PWVIA RM P12
Page 7: ......
Page 89: ...PWVIA RM P12 Ethernet Switches Manual July 2021 82...
