pathway VIA PWVIA RM P12 User Manual Download

Page: 38 / 100

July 2021

PWVIA RM P12 Ethernet Switches - Manual

BASIC PROPERTIES

IDENTIFY DEVICE

Checking this box causes device to commence identify behavior (flashing LCD backlight or Identify LED).

DEVICE NAME

A user-configured, soft label for the Gateway. If left blank (and by default) the device name displayed will be the device’s IP
Address. Shown in the Device window and on Gateway front display.

DEVICE NOTES

A user-configured text description field, shown in the Device view.

FRONT PANEL LOCKOUT

Rackmount VIA switches (PWVIA RM) only.

Checking this will lock the local controls on the front panel of the device.

Scrolling menus allow you to read properties, but changing properties is disallowed.

LCD BACKLIGHT

Rackmount VIA switches (PWVIA RM) only.

Checking this will enable the LCD backlight on the front panel of the device.

DEVICE INFO

DEVICE TYPE

The device type for the currently selected device.

NETWORK INTERFACE

Shows the name of the NIC (Network Interface Card) the device is communicating to the machine running Pathscape on.

Summary of Contents for VIA PWVIA RM P12





































































































Search results

Summary of Contents for VIA PWVIA RM P12

Reviews:

Related manuals for VIA PWVIA RM P12

Brands by name

Popular brands

pathway VIA PWVIA RM P12, User Manual

Search results

Summary of Contents for VIA PWVIA RM P12

Reviews:

Related manuals for VIA PWVIA RM P12

Brands by name

Popular brands