PWVIA RM P12 Ethernet Switches - Manual
July 2021
64
VLAN SETUP
These properties determine the size of the VLAN table, and which VLAN has communication with the switch management
processor. For efficient switch operation, the VLAN range should be kept as small as necessary.
VLAN Setup
VLAN Range Start: 1
VLAN Range End: 10
Management VLAN: 1
VLAN Config/Status
<Back>
If the
Management VLAN
is accidentally set to a value outside the VLAN range, it may be necessary to use the
Factory
Default
function from the
Utilities
menu to restore communication with the management processor and allow further
configuration.
VLAN CONFIG/STATUS: VLAN ID#
Each VLAN is identified by its VLAN ID#.
Each VLAN ID# must be configured separately, and each switch must be uniquely identified on each VLAN in use on that
switch. There is currently no way of copying properties from one VLAN to another.
VLAN Config/Status
VLAN 1
VLAN 2
VLAN 3
VLAN 4
...
<Back>
VLAN 1
Network Setup
DHCP Server: Disabled
IGMP Snooping: Disabled
IGMP Querier: Disabled
Current Multicast Groups
<Back>
The VLAN ID# is assigned to individual ports from the Port Configuration menu (see below for
Port Status and
Configuration Menu
).
Summary of Contents for VIA PWVIA RM P12
Page 7: ......
Page 89: ...PWVIA RM P12 Ethernet Switches Manual July 2021 82...