July 2021
29
PWVIA RM P12 Ethernet Switches - Manual
SOFTWARE (PATHSCAPE) CONFIGURATION
Wherever possible, we recommend using a PC with Pathscape to configure your VIA switch(es). For in-depth information on
using Pathscape, see the Pathscape manual. Pathscape is available for macOS and Windows from the Software section of
our website:
https://www.pathwayconnect.com
If using a PC with Pathscape is not possible or practical, see the section
Front Panel UI and Menu
later in this manual.
NOTE
some features are not available if using only the Front Panel to configure the device.
NETWORK SETUP
PLEASE NOTE: Before any configuration and network setup can be done, including setting the IP, the VIA
switch(es) must be added to a Security Domain. If the device is not added to a Security domain, it will not be
possible to configure any properties.
From the factory, the VIA’s IP address is static, and set to
10.X.X.X
(where X is between 0 and 254), with a subnet mask of
255.0.0.0
and a default gateway of
10.0.0.1
. Before any additional configuration, set the devices’ IP address to the same
subnet and IP range as the computer and other devices on the lighting network.
Additionally, the VIA’s name in the device list will be shown as its IP address. Give it a useful name before continuing.
Summary of Contents for VIA PWVIA RM P12
Page 7: ......
Page 89: ...PWVIA RM P12 Ethernet Switches Manual July 2021 82...
