Pason WITS User Manual Download Page 39

Page: 39 / 44

Revised May 1, 2019

Revision 25 of DOCU225, © Copyright

Page 39 of 44

12160.00

12170.00

12180.00

12190.00

12200.00

12210.00

12220.00

12230.00

12250.00

12260.00

1984PASON/EDR

08210.00

08240.00

Important:

Pason does not guarantee packet order or the order in which the EDR sends each channel within

the packets.

4.15 Using the WITS Monitor

Starting in EDR version 14.12, the EDR includes a WITS monitor (

Figure 16

). The WITS

monitor is a simple diagnostic tool included in the EDR on every Pason Workstation. It's
intended for rig personnel who have a good understanding of WITS and packet
communications. Use it to troubleshoot WITS issues at the rig.

To access the WITS monitor, follow these steps from the EDR main screen on any
Pason Workstation:

1. Click

Menu

Setup

WITS

. The WITS setup screen opens.

2. Click the

WITS Monitor

tab.

Summary of Contents for WITS













































Search results

Summary of Contents for WITS

Reviews:

Related manuals for WITS

Brands by name

Popular brands

Pason WITS, User Manual

Search results

Summary of Contents for WITS

Reviews:

Related manuals for WITS

Brands by name

Popular brands