Revised May 1, 2019
Revision 25 of DOCU225, © Copyright
Page 22 of 44
These modes include pre-selected sets of WITS codes, described in
on page 32.
Tip
:
Use the search box on the WITS setup screen to quickly jump to a specific WITS code.
To select standard WITS codes for a Pason computer to send, follow this procedure:
1. From the EDR main screen, click
Menu
>
Setup
>
WITS
. The WITS setup
screen opens.
2. Click the tab of the Pason computer you want to send the WITS codes, and
ensure that the
Standard
button is selected.
3. To select a preconfigured setting, click
Full
WITS
or
Half
WITS
.
Or,
4. To select outgoing WITS codes individually, click on an unselected WITS code’s
Enable
check box.
5. Select the
Transmission
type and
Interval
for the selected group of WITS
codes. The transmission type and interval apply to all WITS codes in the group.
6. Select the display
Unit
, and type of
Data
Summary
from the drop-down lists.
See
above for more information about these selections.
7. If desired, you can click in a code’s row, and enter a new WITS code for that row.
Any standard WITS code that you have changed displays a Reset button. If you
enter a WITS code that is already in use, click the
Reset
button to change back
to the default Pason WITS code.
8. When you are finished, click
Save
>
Exit
to return to the Setup Menu. The Pason
computer starts sending the selected WITS codes.
