Revised May 1, 2019
Revision 25 of DOCU225, © Copyright
Page 31 of 44
•
Send both codes in the same WITS packet. Problems occur when Pason
receives one or the other, but not both.
•
Send the packet at a minimum 0.2 m (1 ft) interval.
A well-formed gamma packet looks like this:
&&
1984PASON/EDR
08211780.2
082463.8
!!
4.10 Importing and Exporting Your WITS Settings
The EDR enables you to import and export saved WITS settings, for sharing via email or
USB memory stick.
Follow these steps to export WITS settings:
1. Select the WITS out tab of the Pason computer whose settings you want to
export.
2. Click the
Export
button.
3. Select a save location from the Save In drop-down list.
4. Enter a name for the saved settings file. Note that the default file name includes
the name of the Pason computer the settings are currently applied to, which is
useful.
5. Leave the file type at the default of WITS Out Template Files.
6. Click
Save
.
Follow these steps to import WITS settings:
1. Select the WITS out tab of the Pason computer you want to apply the imported
settings to.
2. Click
Import
.
3. Navigate to and select the settings file you want to import. This file must have a
.wto file extension.
4. Click
Open
. The EDR applies the saved WITS settings you selected, and
refreshes the WITS setup screen.
Note:
When you import WITS settings, the EDR overwrites your existing settings, including any
custom codes you have set up. Custom codes not included in the import file are deleted.
