Revised May 1, 2019
Revision 25 of DOCU225, © Copyright
Page 25 of 44
Figure 12: Highlighted custom WITS row
3. Click in a code’s row. The EDR highlights the row.
4. Within the highlighted row, enter the following custom code information:
•
Code
Enter a WITS code for the trace by clicking under Code in the highlighted
row, and entering a four digit WITS code. Ensure that this code is different
from the existing WITS codes. If the code you enter conflicts with a current
EDR WITS code, the EDR highlights your entry in red and does not allow you
to save your settings.
•
Name
To enter a name for the custom WITS code, click under Name in the
highlighted row and enter a name.
•
Unit
To select the display units, click under
Unit
in the highlighted row
and enter
the name of the display units. Note that these are display units only—the
EDR
does not
perform conversions based on the units you enter.
•
Decimals
To select the number of decimal places the EDR uses for the WITS value,
Enter your
codes, names,
and units by
clicking in any
row.
