Revised May 1, 2019
Revision 25 of DOCU225, © Copyright
Page 23 of 44
Figure 11: WITS setup screen
Selecting Pason Traces for the EDR to Send
Starting in EDR version 14.12, the WITS setup screen includes a feature that enables
you to send Pason trace data using WITS. Use this feature to send Pason traces that
aren't included with the standard WITS codes.
To select Pason traces to send, follow these steps from the EDR main screen on the
RMPC:
1. Click
Menu
>
Setup
>
WITS
. The WITS setup screen opens.
2. Click the tab of the Pason computer you want to send the WITS codes (WITS
Out RMPC, WITS Out TPC Server, etc.).
3. Click the
Pason EDR Traces
button. The screen displays all available EDR
traces not currently included as a standard WITS code.
4. Check the
Enable
check box of the traces you want to send.
5. Select a transmission type. The transmission type applies to all the Pason traces
you've selected.
6. If you're using a time-based transmission type, choose a time interval. The time
interval applies to all the Pason traces you've selected.
To enable an
outgoing WITS
code, select its
check box.
