manualshive.com logo in svg

Paso CR8506-V, Instructions For Use Manual

The Paso CR8506-V Instructions For Use Manual is a comprehensive guide that helps users maximize the benefits of this exceptional product. This manual is available for free download from manualshive.com, providing users with easy access to step-by-step instructions on setting up and utilizing the CR8506-V to its full potential.

Share
Download
background image

30

PA8500-VES System

System Manual | 2014

UK

CR8506-V 

|

 RT8506-V

7.   MENU STRUCTURE

The.

CR8506-V

.enables.access.to.the.system.functions.through.a.set.of.Management.Panels,.grouped.according.to.operational.typologies.and.

intended.uses.into.Option.Menus.accessible.from.the.Main.Page..Furthermore,.the.following.Option.Menus.were.assigned.to.different.levels.

of.access,.with.reference.to.the.various.different.circumstances.requiring.different.degrees.of.skill.on.the.part.of.the.personnel.and.different.

levels.of.authorisation.
•.<.

MUSIC

.>.Menu

Default.window.for.using.the.system.in.normal.quiescent.Conditions..It.enables.control.of.the.BGM.sources.and.adjustment.of.the.volumes.of.

the.music.section..This.menu.is.not.accessible.during.a.Voice.Alarm.Condition..At.this.basic.level,.the.RESET,.ALERT.and.EVAC.keys.are.not.

operational.
•.<.

AUDIO SETTING

.>.Menu

Group.of.basic.options.for.standard.operating.conditions..It.is.intended.for.users.for.setting.and.adjusting.the.PA.sources..At.this.basic.level,.the.

RESET,.ALERT.and.EVAC.keys.are.not.operational.
•.<.

INSPECTION

.>.Menu..

First.access.level,.for.investigating.the.status.of.the.system..It.is.intended.for.the.personnel.responsible.for.initial.checking.of.the.causes.leading.

to.a.failure.or.emergency.condition..At.this.initial.access.level,.the.RESET.key.has.the.function.of.resetting.the.buzzer.signalling.a.FAULT..At.

this.basic.level,.the.ALERT.and.EVAC.keys.are.not.operational.
•.<.

OPERATOR 

>.Menu

Second.access.level.for.trained.personnel,.authorised.to.manage.the.system.in.emergency,.failure.and.disablement.conditions..A.password.for.

accessing.this.level.can.be.added.
•.<.

CONFIGURATION 

>.Menu

Third.access.level,.for.trained.personnel.authorised.to.use.the.advanced.functions.of.the.system.and.to.alter.the.configuration.parameters,.for.

starting.up.and.altering.the.system..A.password.for.accessing.this.level.can.be.added.
•.<.

SERVICE

.>.Menu

Fourth.access.level,.included.among.the.options.of.the.CONFIGURATION.Menu,.for.servicing.activities,.up-dating.of.firmware.and.altering.the.

operating.parameters.of.the

 CR8506-V

.controller..Use.is.permitted.only.for.technical.personnel.having.the.necessary.access.key.

•.<.

EMERGENCY

.>.Menu

Operational.environment.for.managing.Manual.Emergencies,.with.top.priority..Accessible.at.all.times.using.the.dedicated.“Emergency”.key,.it.

may.be.used.only.by.authorised.personnel.trained.with.regard.to.the.Emergency.and.Evacuation.Plan.(EEP).
The.functions.associated.with.levels.featuring.restricted.access,.for.which.a.password.may.be.set,.are.highlighted.by.the.symbol

7.1 

“HOME” FUNCTIONS - ACCESS TO THE OPTION MENUS

7.1.1  

Basic Level - MUSIC menu

After.switching.on.the.system,.the.MUSIC.Management.Window.will.be.shown.directly..

To access the HOME page, press the MENU key. From the 

HOME page it will be possible to select the various different Option Menus for the advanced functions of the system.

.

From the HOME page, press 

ESC to return to the MUSIC management panel. 

MENU

ESC

Summary of Contents for CR8506-V

































































Reviews:

No comments

Related manuals for CR8506-V

Nelsen Corporation C Series Programming Manual preview
C Series
Brand: Nelsen Corporation Pages: 16
National Instruments C Series Calibration Procedure preview
C Series
Brand: National Instruments Pages: 8
National Instruments C Series Getting Started preview
C Series
Brand: National Instruments Pages: 34
Gantner E Series Communications Manual preview
E Series
Brand: Gantner Pages: 56
Waterway OASIS Instruction Manual preview
OASIS
Brand: Waterway Pages: 16
DAV TECH DA 250 Installation And Maintenance Manual preview
DA 250
Brand: DAV TECH Pages: 10
Yardney Synergy Quick Start Manual preview
Synergy
Brand: Yardney Pages: 8
GAUGEMASTER COMBI Manual preview
COMBI
Brand: GAUGEMASTER Pages: 2
EasyIO FC Series Firmware Upgrade User Manual preview
FC Series
Brand: EasyIO Pages: 19
Zero 88 FLX Copying Manual preview
FLX
Brand: Zero 88 Pages: 2
Zenit FLX Use And Maintenance Instructions preview
FLX
Brand: Zenit Pages: 24
Harmar Mobility Pinnacle Installation And Service Manual preview
Pinnacle
Brand: Harmar Mobility Pages: 16
Parker ACR7000 Series Hardware Manual preview
ACR7000 Series
Brand: Parker Pages: 21
Parker AC890PX Series Quick Start Manual preview
AC890PX Series
Brand: Parker Pages: 26
Parallax 700-10016 Manual preview
700-10016
Brand: Parallax Pages: 3
Ultratec SureFire Operation Manual preview
SureFire
Brand: Ultratec Pages: 33
Xilinx Virtex-6 FPGA Hardware Setup Manual preview
Virtex-6 FPGA
Brand: Xilinx Pages: 2
Aulisa GA-AP0011 Instructions For Use Manual preview
GA-AP0011
Brand: Aulisa Pages: 32

Brands by name

Popular brands

Load more brands