Paso CR8506-V Instructions For Use Manual Download

Page: 35 / 64

System Manual | 2014

PA8500-VES System

CR8506-V

RT8506-V

8.2 <MUSIC> MENU

Setting the audio parameters of the BGM sources

Music.source.control.panel,.shown.by.the.CR8506-V.in.normal.“quiescent.Condition”.

•..

Indications on the display

A). General.output.volume.of.the.BGM.Source

B). Status.labels.of.each.of.the.6.zones:

OFF

Music.disabled

ndB

Music.enabled.with.the.associated.output.volume.

CALL

. Call.in.progress.from.a.“voice”.source.(PA.Source).

Line.not.active.

C). BGM.Source.selected.for.the.“music”.channel.

D). PA.Source.active.on.the.“voice”.channel.for.service.announcements.

Note:

The.CR8506-V.system.enables.service.announcements.to.be.made.from.a.PA.Source.to.the.required.zones.while.continuing.to.broadcast.

music.to.all.the.other.zones.not.affected.by.the.call..When.an.announcement.is.being.made,.the.display.will.show.the.source.that.is.being.used.

on.the.voice.channel.(

),.and.the.status.label.of.each.zone.selected.(

).will.indicate.the.word.CALL..

Service.announcements.will.be.broadcast.at.the.volume.set.for.the.input.of.the.PA.Source.(see.AUDIO.SETTINGS.menu).and.if.appropriate.will.

also.be.sent.to.the.zones.for.which.music.is.de-activated.(OFF).

•..

Navigation keys

MENU:.For.accessing.the.MAIN.page

Ok:.For.selecting.a.source.of.BGM

kEYS.1.to.6:.For.selecting.music.zones.

RESET:.Not.operational

ALERT:.Not.operational

EVAC:.Not.operational

8.2.1 Selection of a BGM Source for the “music” channel

Press.

.to.select.the.required.source.of.music.from.among.the.following:

•.AUX.

Microphone.source.connected.to.the.LINE.AUX.IN.input.

(R7)

•.USB.

USB.External.source.(flash.memory.plugged.into.the.front-panel.USB.socket.

(C11).

•.REMOTE. Source.selected.by.the.secondary.CR8506-V.via.the.

CR8506-V.LINk.socket.(R3).

•.INPUT.1.

Microphone.source.connected.to.the.IN.1.input

.(R6).

•.INPUT.2.

Microphone.source.connected.to.the.IN.2.input

..(LINE.or.MIC.sockets).(R5).

•.NO.INPUT. No.input.selected..

8.2.2 Overall volume control of the “music” channel BGM Source

•.Use.the.

+/-

.knob.to.adjust.the.volume.

The.attenuation.setting.is.visible.directly.on.the.display.(

),.with.variations.of.1.dB..

The.volume.that.is.set.is.stored.for.each.BGM.Source.selected.

8.2.3 Adjustment of the music volume for each output zone

•.Hold.the.numerical.key.of.the.required.zone.(from.1.to.6).down.and.turn.the.

+/-

knob.

The.output.volume.is.adjustable.to.any.of.5.levels.of.attenuation.in.respect.of.the.master.volume.(

);.the.attenuation.steps.are.as.follows:

-15dB

.(maximum.attenuation),.

-9dB

-6dB

-3dB

0dB

.(no.attenuation).

The.volume.that.is.set.refers.only.to.the.“Music”.channel..

N.B.: Adjustment is not possible on those lines to which an RT8506-V router is connected.

8.2.4 Activation and de-activation of music for each output zone

•.Press.and.then.release.the.numerical.key.of.the.required.zone.

(from 1 to 6).

The.status.label.(B).will.switch.between.

OFF

.(music.disabled).and.ndB.(music.

.and.associated.output.volume).

Summary of Contents for CR8506-V

































































Search results

Summary of Contents for CR8506-V

Reviews:

Related manuals for CR8506-V

Brands by name

Popular brands

Paso CR8506-V, Instructions For Use Manual

Search results

Summary of Contents for CR8506-V

Reviews:

Related manuals for CR8506-V

Brands by name

Popular brands